Question:
I have a YDWG and can not update to the actual sw version.
Up to 1.16 all worked, but not to higher versions.
After reset the unit now starts with 1.10

Answer:
As a remedy, please use intermediate ‚engineering“ firmware. Do the following:
1. Perform another hardware reset
2. Download and install the following firmware:
http://www.yachtd.com/downloads/V120_NO_WG.zip
3. On success, do NOT perform a hardware reset, and immediately update the Device to the most recent firmware:
http://192.168.4.3/downloads/WUPDATE.zip